|
|
|
|
|
|
Pinske Indexing Arm (set of two)
|
|
|
The 11" Arms are preset for use with the Wavy Base and Bit to remove 1⁄16" of material from each side of the seam. If you’re using the entire Pinske System, the 8" Arms are preset to use with a Straight Edge and Template Guide for routing an exact 1⁄16" of material.
|
|
|
|
|
|
|
|
|
|
Pinske Straight Edges
|
|
|
Pinske Straight Edges are the foundation of the Pinske Edge and its fabrication ship. Precision craftsmanship starts with the basics....the straightest line,the sharpest edge. The edges offered here are a result of Pinske's exacting standards.
- 5 7/8" wide, 5/16" thick extruded aluminum
- Machined perfectly straight (.005 T.I.R. on 150") on both edges
- The extrusions give your router a ridge to ride on for less friction and smoother passes
|
|
|
|
|
|
|
|
|
|
Pinske Power Grips (pair) w/carrying case
|
List Price: $148.00
Our Price: $148.00
|
|
|
No solid surface craftsman should be without Pinske Power Grips. Tom started with the suction design of glass workers' grips then added a few extras to make them especially versatile. These Power Grips are easy to attach, easy to remove and will never scratch or mar your material. There's no better way to grab and hold solid surface material than with the Power Grips' soft rubber pads and powerful suction.
The Pinske Power Grips can also be used for:
- Use to carry whole sheets of solid surface material
- Keep cutout pieces from falling through
- Secure small pieces for repairs
|
|
|
|
|
|
|
|
|
|
Pinske Power Stand Only
|
List Price: $249.00
Our Price: $249.00
|
|
|
This is the same as the Power stands with rails except there are no rails.....
|
|
|
|
|
|
|
|
|
|
Pinske Edge Power Stand with rails
|
|
|
Pinske Power Stands are sturdy, compact and portable, and they're fast and simple to set up and take down. These power stands are 32 1/2" H x 26" ; they fold down to just 9" wide. They provide equal support along the entire length of your material. The Pinske Power Stands come with either 48", 96" or 144" rails, or just the stands.
|
|
|
|
|
|
|
|
|
|
Pinske Cove Backsplash Jig
|
List Price: $749.00
Our Price: $749.00
|
|
|
Save time and add profit to any fabrication business. Our Backsplash Jig lets you clamp the coving stick and splash. They go together quickly and automatically align.
- Our cove jig features a special spring clamp attached to the bottom of the jig to hold the 1/2" x 15/16" cove stick to the milled out dado on the jig
- The jig's length lets you set up several splashes at once.
- Since every piece is perfectly square, you have less trouble routing the cove radius and save time sanding.
|
|
|
|
|
|
|
|
|
|
Pinske Edge Starter System
|
List Price: $3,259.00
Our Price: $3,259.00
|
|
|
Faster setup, precise edges, invisible seams, smoother curves... there is a better way, and it starts with Pinske's tools, designed and machined to exacting standards that show up in your finished products. This special Starter System includes all the essentials to put you on your way to fabricating better products, and taking home bigger profits!
The Starter System Includes:
- Instruction Video (VHS or DVD)
- 2 pair of Power Grips with Turnbuckles
- 24oz. Power Grip Cleaner
- 1 pair 8" Indexing Arms
- 1 pair of 11" Indexing Arms
- 31", 48",102" and 150" Straight Edges
- 144" Power Stand
- 100 2" Spring Clamps
- Wavy Edge Router Base
- 2" Insert Wavy Bit (2065)
- Wavy Inserts (box of 10; 2265)
- 5/8" Template Guide and Lock Nut
- 3/4" Template Guide and Lock Nut
- 2" x 5/8" Insert Router Bit (2068)
- 2" x 5/8" Inserts (box of 10; 2268)
- 1 1/2" Inside Radius Template
- 90° Pinske Square
- Sink and Cooktop Cutout Template
|
|
|
|
